This takes about 1 to 2 minutes.

0.

Get rid of excess water on the ink cartridges and let them dry.

. Click the Deep Cleaning icon.

When the Print Head Cleaning dialog box opens, select the ink group for which Cleaning is to be performed.

May 23, 2023 · Hello, If you are getting a jam message when using the ADF, you can try cleaning the ADF using the steps in the link HERE.

Replace the cartridge and print a test page. You can also try blowing the paper feed path with compressed air. (1) Click the Maintenance tab.

The print head made be clogged and I recommend performing a nozzle cleaning.

If you continue to have issues, I would suggest contacting support over the phone at 1-800-652-2666. Oct 25, 2022 · 4. Also in this article, you will find links for a deep cleaning and nozzle check.

. Manually cleaning printers with a removable printhead.

This takes about 1 to 2 minutes.

fc-smoke">May 23, 2023 · 05-23-2023 11:26 AM.

class=" fc-smoke">Oct 25, 2022 · class=" fc-falcon">4. .

The paper is fed into the printer slowly, and the printer starts cleaning the fixing roller. Make sure that the printer is on and then click Execute.

.
Regularly clean the machine to prevent deterioration in printing quality and to ensure that you use it safely and easily.
When the printer comes on, release the button.

The Nozzle Check dialog box will open.

.

class=" fc-smoke">Jun 4, 2020 · class=" fc-falcon">9. If the printer is in it's 1 year warranty, I recommend reaching out to Canon support for your warranty options. Carefully read the safety instructions before you start cleaning.

The printer. (3) Select the ink group to clean. Perform Deep Cleaning. After you take the cartridge out of the bowl, wipe it dry with a clean cloth. The cleaning will be complete when the ON lamp lights green after flashing. After the nozzle cleaning, print a nozzle check and compare it to our sample.

While cleaning the rollers, you can also inspect the slots the paper feeds though for any obstructions.

. .

Dip a cotton swab into rubbing alcohol, and then: Find the exposed fine wires inside the printer.

May 23, 2023 · Hello, If you are getting a jam message when using the ADF, you can try cleaning the ADF using the steps in the link HERE.

.

If you are getting smudges in the print, you can try cleaning the the fixing assembly to see if it removes the smudges.

Click the Deep Cleaning icon.